是這樣的
我原本有一組喇叭(ALTEC 的 BXR1221 暫稱為A)
最近買螢幕(dell U2414h)又送了一個喇叭(dell的AC511 暫稱為B)
B因為可以跟螢幕組合 裝在螢幕下方不占空間 但是沒有3.5音源線!!(但B本身有3.5輸出孔和MIC孔)
而且我發現 只要把螢幕的喇叭(B)插上螢幕後面的USB 或是主機上的USB
(*B是插USB的沒有3.5音源線!!> < ) , 只有B會發出聲音, A就不會有聲音 或是反之,
如果用控制台裡的"聲音"選項去調整 一次也只能選擇一種 , "A或B"當作預設發聲的裝置,
想請問有辦法能讓A和B同時都可以發出聲音嗎? 因想說物盡其用..
不然B放著也是招灰塵..QQ
3.5mm插孔目前是有四組 (贈送的B喇叭上有一個3.5音源輸出孔,主機前後方各一個, 螢幕背面也有一個)
目前試過的方法有
1. A是直接插主機上的3.5音源輸出孔 + B插螢幕後方的USB或是主機上的USB (這邊從控制台裡的聲音去看,B是顯示立體音,也就是只能選擇左右喇叭)
----> 一次也只能讓一組喇叭有聲音
2. A插B喇叭上的3.5輸出孔 + B一樣接著USB
----> 結果很好笑的 只有A會有聲音 螢幕下方的B反而沒聲音,但卻又可以用B上的音量鈕調整A發出的音量
但B說無聲就是無聲
3.A是插螢幕背面的3.5孔 + B一樣接著USB, (然後這邊從控制台裡的聲音去看,A只能選擇立體音,
也就是只能選擇左右喇叭)
----> 一樣 也是B無聲 A有聲音 B也可以控制A音量 QAQ
想問問大家有沒有可以同時讓兩組都能使用的方法QAQ 希望是能以盡量不要降低音質為主的方法
謝謝 !!
This entry passed through the Full-Text RSS service — if this is your content and you're reading it on someone else's site, please read the FAQ at fivefilters.org/content-only/faq.php#publishers.